High gain outdoor 2.4GHz WIFI WLAN antnena is made of fiberglass and aluminum. It terminated with N male connector. When mounted vertically this shrouded connector helps prevent against water and weather build-up on the threads.This omnidirectional 2.4Ghz antenna delivers extended access point range in a single floor environment ideally positioned in the corner of a building. It functions from area-to-area so that you can wirelessly connect LANs between the buildings in a campus-type environment.
• IEEE 802.11b and 802.11g applications
• WiFi and 2.4 GHz wireless video systems
• Public Wireless Hotspot
Because of the small vertical angle, it can only transmit signals at 6 to 8 degrees horizontally. Therefore, FRP antennas are widely used for wireless coverage in plain areas, wireless coverage in the same horizontal location environment, and wireless coverage in the same horizontal location environment. On a higher position, the signal can only be transmitted to a far position, but nearby or a place with a height difference cannot be covered.
Outdoor harsh environment applications, unmanned areas, ships, base stations, communication repeaters, etc.
Antenna Type |
WIFI base station outdoor antenna |
Model Number |
SXW-WIFI-WM4 |
Frequency Range(MHZ) |
2400-2500MHz/5100-5800MHz |
Gain |
10DBI |
V.S.W.R |
≤1.8 |
Polarization Type |
Linear or Vertical |
Maximum Input Power |
50W |
Mounting way |
L-bracket for wall or pole (U-Bolts) |
Radiation |
Omnidirectional |
Lightning Protection |
DC-Grounded |
Antenna Material |
Fiberglass stainless steel |
Dimensions-mm |
500mm |
Rated Wind Velocity(m/s) |
60m/s |
Radome color |
Gray or White,Black |
Connector type |
N female connector or N male connector |
Extension cable |
Available(cable length can be customized) |
Operating Temperature |
-40℃~+80℃ |
Storage Temperature |
-40℃~+85℃ |
ROHS,CE Compliant |
YES |